Terminator 2: Judgment Day
Terminator 2: Judgment Day mistake picture

Continuity mistake: In the scene where the T-800 and the T-1000 have their first shootout in the mall, John Connor begins to run down a series of stairs to get to his dirtbike. Every time he passes a door it reads the level he's currently on. You will see he passes level 2 twice. (00:31:40)

Terminator 2: Judgment Day mistake picture

Revealing mistake: In the scene where the Terminator and the T-1000 are fighting in the corridors of The Galleria, the Terminator has fired multiple shots at the T-1000. When he gets up off the floor, the Terminator throws him into the left wall and the impact hole is already visible before he hits. (00:31:45)

Aidan2011

Audio problem: John Connor's bike is an XR-100, it is a 4 stroke engine. In the movie they dub in the sound of a 2 stroke. It is a quiet little engine so that is why they probably dubbed in the sound. (00:32:00)

Terminator 2: Judgment Day mistake picture

Continuity mistake: During the chase scene after the T-1000 commandeers the tow truck, the shadows are inconsistent from shot to shot. Understandable, as each shot was made at different times during the day, but still noticeable. (00:32:00)

Terminator 2: Judgment Day mistake picture

Continuity mistake: At the Galleria, the T-1000 fires rounds into the Terminator's back, but the damage to his jacket disappears when he is thrown through the window. (Director James Cameron said the scripting of this sequence at the time of filming was different). (00:32:10 - 00:32:55)

Continuity mistake: The Winchester 1887 lever action rifle is shown with different levers as the Terminator needs them. When on foot, the lever is of a standard narrow type and when on the bike, it has a large lever loop that also has a metal hand plate attached to it, making it easier for Arnold to flip-cock the gun when reloading. (00:32:20 - 00:36:35)

MGD

Terminator 2: Judgment Day mistake picture

Revealing mistake: Just before the T-1000 crashes the truck into the bridge and the following shot you can see briefly that it is a dummy in the drivers wheel. The most noticeable difference is the dummy has black hair compared to the T-1000's brown hair. (00:32:55)

Lummie

Continuity mistake: At the mall, after the Terminator has been thrown through a glass window shop, a man in grey pants approaches him from behind. When he stands up the guy has disappeared. (00:33:10)

Sacha

Terminator 2: Judgment Day mistake picture

Revealing mistake: After the T-1000 steals the truck and throws the driver out there is a big action sequence where the truck hits a lot of cars. In one scene the truck hits 2 cars which were both already stopped across the road front bumper to front bumper, blocking the road in the process, making it impossible for the truck to miss them. (00:33:15)

Terminator 2: Judgment Day mistake picture

Continuity mistake: When the T-1000 is driving the truck, he drives off a bridge and the windshield pops off, but in the next scene the windshield is back. (00:33:45)

Terminator 2: Judgment Day mistake picture

Continuity mistake: If you watch carefully when the T-1000 has driven off the bridge in the truck, you can see the suspension and steering gear collapse and shift (severely) to the driver's right. A moment later, the alignment is perfect. (00:33:45)

Terminator 2: Judgment Day mistake picture

Revealing mistake: During the scene where the T-1000 is in a truck chasing John Connor on a motorcycle, take a good look at the actual shot of it driving off of the bridge. The street sign is correct, but everything else is backwards! This is because they shot it backwards and flipped the shot during post production. Since the sign was so obvious, it was digitally reversed. However, a good look at the truck's name on the grill will show the shot is backwards. (00:33:50)

Terminator 2: Judgment Day mistake picture

Visible crew/equipment: After the tow truck plunges into the canal and John takes off on his bike, there's a shot starting low on the truck and craning up to windshield-level. You can see a reflection in the truck's paint job, next to the grille, of a large light and a crewmember. (00:34:05)

rbryant73

Terminator 2: Judgment Day mistake picture

Revealing mistake: Obvious stunt double for John Connor when he takes a wide berth from the street into the aqueduct. His hair, for example, is no longer across his forehead. (00:34:45)

Daz

Terminator 2: Judgment Day mistake picture

Continuity mistake: When the T-1000 is chasing John in the black tow truck, after the truck goes off the bridge you can see that the truck has two tall exhaust pipes behind the cab. Then right after the truck hits the 2nd old car it shows a shot from behind the truck and the pipes are suddenly cut off. (00:34:55)

Terminator 2: Judgment Day mistake picture

Continuity mistake: When John stops his bike at the canal, a supermarket trolley and a flat tire appear behind him. (00:35:00)

Sacha

Continuity mistake: John enters the canal, passes by a bridge and pulls over 200 meters ahead. From his POV, the distance from the bridge is merely 50 meters. (00:35:00)

Sacha

Visible crew/equipment: In the shot of John riding under the bridge just seconds before the roof is ripped off the truck, the shadow of the camera is moving along the floor by John's bike. (00:35:15)

Ssiscool

Terminator 2: Judgment Day mistake picture

Continuity mistake: During the aqueduct chase the amount of damage to the semi-trailer truck changes repeatedly. Damage to the semi's grille is severe, then is not. This happens about three times. (00:35:20)

Dr. Silberman: You broke my arm!
Sarah Connor: There's 215 bones in the human body. That's one.

More quotes from Terminator 2: Judgment Day
Upvote valid corrections to help move entries into the corrections section.

Suggested correction: In one of the special features on the Blu-ray version, director James Cameron can be seen holding and shooting the minigun, while saying: "Arnold's gonna love this."

More trivia for Terminator 2: Judgment Day

Question: Why did the T-1000 kill the officer in the beginning and steal his clothes? Later we see the uniform heal so we know he can create clothing.

brianjr0412

Answer: He didn't steal his clothes, but copied them. He can only copy things that he physically touches. He had to touch the cop to take on his look. Also since the cop was a witness to this ruthless killing machine, it needed to kill him to protect itself from being discovered too soon. The Terminator is an infiltration unit on an assassination mission to kill John Connor. As advanced as it is, it needs as little attention drawn to it as possible. Having the entire police force chasing him down would not be ideal for his goal to get Connor and would inevitably slow him down and risk allowing Connor a better chance of escape. The T 1000 also is an emotionless machine programmed by other machines that are intent on killing off all humans in the future. It doesn't value human life, and if anything has been programmed to regard them as a pest to be dealt with. The cop was a means to an ends and an obstacle to take out. As well, the cop did also posses a weapon, and was the T-1000's quickest way to get his hands on a gun.

Quantom X

Answer: While the T-1000 did kill the officer at the beginning (which is pretty much standard behavior for Terminators), it didn't steal the officer's clothes. It merely sampled the officer's appearance as soon as it touched him. However, it did steal the officer's firearm, because the T-1000 could not mimic complex mechanical objects or weapons (it could only mimic stabbing and cutting weapons).

Charles Austin Miller

More questions & answers from Terminator 2: Judgment Day

Join the mailing list

Separate from membership, this is to get updates about mistakes in recent releases. Addresses are not passed on to any third party, and are used solely for direct communication from this site. You can unsubscribe at any time.

Check out the mistake & trivia books, on Kindle and in paperback.